Your cart is empty

High pressure blower HD150

Article no.: 5800424
+

1,30 m³ / min - 15000 Pa (150mbar)

HERZ– high-pressure blower:

-  Low noise level
-  Maintenance-free
-  Compact design
-  Completely oil-free

The operating temperature of the high-pressure blower may not exceed 60°C.

Specail version also available with UL cerification

 

The blowers are also useful for utilisation with frequency converters for speed control. Motors are provided with a phase separator. The device provided with a PTC resistor, whose signal can be analysed using an optional tripping unit.

In the standard version the blowers are provided with a steel filter on the intake side, which can be used again after it has been cleaned with compressed air. When a fine filter is used, the stainless steel filter must be removed.

Technical data

Volumetric current [m³/min] ₁ 1,30
₂ 1,50
Overall pressure difference [Pa] ₁ 15000
₂ 20000
Voltage [V] ₁ Y/Δ 200 – 255 / 346 – 440
₂ Y/Δ 200 – 277 / 346 – 480
Frequency [hz] ₁ 50
₂ 60
Current draw [A] ₁ Y/Δ 1,73 – 2,10 / 1,00 – 1,20
₂ Y/Δ 2,00 – 2,50 / 1,15 – 1,45
Speed [rpm] ₁ 2855
₂ 3450
Motor power [KW] ₁ 0,55
₂ 0,65
Noise pressure level [LpA(dp)] ₁ 64 – 73
₂ 69 – 76
Weight [kg] ₁ 12
₂ 12
Intake opening [mm] G1 1/4Zoll
Exhaust opening [Ø mm] G1 1/4Zoll / Ø 38 mm Adapter (außen)
Ambient temp. [°C] -20°C bis +60°C
Type of protection IP 55
Measurements L x B x H [mm] 283 x 241 x 268
optional Kondensator 230 V; 40 µF / V
Ask about this product

Attachments

Back